35 kV-Class Equipment

35 kV-Class Metal-Enclosed Switchgear

Switchgear Builders Texas manufactures new metal-enclosed switchgear to project specifications and serves customers across Texas from the United States. A 35 kV-class application calls for coordinated decisions about system voltage, switching and interruption duties, incoming and outgoing cable connections, and safe operating interlocks. We review those requirements for each quotation; the class designation alone does not establish a particular rating, configuration, listing, component origin or lead time.

UL 891 switchboardsMADE IN USAFAST lead times
NEW EQUIPMENT. PROJECT FOCUSED.SERVING TEXAS
Electrical switchgear cabinets arranged on shipping pallets

NEW SWITCHGEAR FOR YOUR PROJECT

MANUFACTURING / EQUIPMENT / TEXAS

Define the 35 kV-Class Arrangement

Start with the system’s highest operating voltage and the equipment’s intended function, then distinguish a load-interrupter switch-and-fuse arrangement from a circuit-breaker arrangement. A fused switch may suit a defined transformer-feeder duty, while a breaker scheme may be appropriate where the protection design requires a different operating or coordination approach. Specify incoming and outgoing ways, normal and alternate sources, tie requirements, and the equipment’s indoor or outdoor application.

Provide a one-line diagram and identify source characteristics, grounding method, connected load, transformer data, and the protective devices upstream and downstream. Explain whether the gear serves a service entrance, utility interface, substation, or industrial distribution point. These details help us review the proposed arrangement and identify missing design inputs before pricing. A 35 kV-class label is not a substitute for confirming the system voltage and application-specific ratings.

Establish Interrupting and Withstand Duties

Switch, fuse, and breaker choices depend on the available fault current and the protection scheme—not simply on nominal voltage. Provide the short-circuit study or the utility’s available-fault-current data at the connection point, along with the expected clearing time where available. Identify which device must interrupt a fault and which components must withstand the resulting duty until protective devices operate. The applicable interrupting and short-time ratings must be reviewed for the selected configuration.

For fused arrangements, document transformer kVA, primary protection objectives, inrush considerations, and coordination requirements with secondary protection. For breaker arrangements, provide relay functions, instrument-transformer requirements, trip and close power details, and any communication or control interfaces. We confirm ratings and component selections during project review; do not infer a particular interrupting capability from the equipment class or assume that a fuse and breaker arrangement are interchangeable.

Plan Cable Terminations and Clearances

Cable entrance direction, termination method, and cable construction affect compartment layout and the space needed to make and inspect connections. Identify the number of cables per phase, conductor material and size, insulation type, shielding, and whether the project uses shielded cable terminations. Include cable routing constraints, minimum bending requirements from the cable supplier, and the available space below, above, or behind the equipment. These inputs help determine whether the proposed termination arrangement is practical.

Specify the termination interface required by the project and identify any separate surge-arrester, grounding, or test provisions. Clarify whether cables enter from below or another direction and whether trench, duct, or conduit positions are fixed. Provide room dimensions, door and access restrictions, and required front, rear, and side working clearances from the project design. Final clearances and interfaces depend on the selected equipment and applicable installation requirements; verify them before releasing construction documents.

Specify Interlocks and Operating Logic

Interlocks should reflect the actual operating sequence and prevent the specific unsafe actions identified by the design. Describe source-transfer logic, bus-tie operation, grounding-switch requirements, and any restrictions on opening a compartment or operating a device. State whether interlocking is mechanical, key-based, electrical, or a coordinated combination, and identify the devices and positions that must be monitored. Avoid relying on a generic interlock description when the one-line diagram shows multiple sources or alternate operating modes.

For each operating condition, document the permitted sequence and the condition that must block an operation. Include requirements for remote operation, local controls, indication, control power, and interfaces with protective relays or a supervisory system. Confirm how the design addresses loss of control power and maintenance access. Interlock functions and their verification should be defined in project documentation and reviewed with qualified engineering and installation personnel; they do not replace approved operating procedures.

Resolve Protection, Controls, and Interfaces

A useful quotation package includes the one-line diagram, equipment schedule, protection narrative, and available fault-current information. Add control schematics or functional requirements when the project needs remote indication, trip circuits, metering, alarms, or communications. Identify the required control-power source and voltage, relay functions, instrument-transformer ratios if established, and terminal or signal interfaces. Mark unresolved values as design inputs rather than treating assumptions as confirmed equipment requirements.

Coordinate the switchgear boundary with transformers, cables, grounding systems, and upstream protection. Identify whether metering is utility-specified, whether surge protection is required, and which party supplies external conductors or control connections. List applicable project standards and required submittals, including outline drawings, elementary diagrams, and component data where requested. Applicable standards and any product listing must be verified for the specific configuration; UL 891 applies to switchboards and is not a blanket standard for 35 kV-class switchgear.

Purchase New Equipment or New Retrofit Components

We supply new equipment and new retrofit components. For a complete new lineup, provide the required arrangement, dimensions, electrical duties, environmental conditions, and project schedule for review. For a retrofit component, identify the existing manufacturer and model, equipment serial or catalog information where available, compartment dimensions, bus and primary-connection details, control interfaces, and photographs or drawings. Compatibility must be assessed rather than assumed from a product name or voltage class.

State whether the project requires American components and identify any project-specific documentation or domestic-content conditions. Component origin, engineering, availability, test documentation, and lead time are confirmed for each quotation; a request does not establish independent verification or compliance with Buy American or other domestic-content rules. Include the delivery destination in Texas or elsewhere in the United States, requested submittal milestones, and the date equipment is needed. Installation, servicing, testing, and energization require qualified personnel following approved procedures.

LET'S BUILD SOMETHING

Start with
the details.

Tell us what you’re working on. The more you can share about your project, the better we can begin the conversation.

PROJECT INQUIRY

Request a quote

This form opens your default email application. Your inquiry is sent only when you send the email. You can also email us directly or call our team.

* Required fields

Request a quote