Metering Integration

Metering and Monitoring Integration

Switchgear Builders Texas manufactures new equipment and supplies new retrofit components for metering and monitoring projects serving Texas. A clear design brief connects the power meter and current transformers (CTs) to the switchgear configuration, communications network, required data points, and party responsible for each interface. We serve Texas from the United States; equipment configuration, component origin, documentation, and lead time are confirmed during project review.

UL 891 switchboardsMADE IN USAFAST lead times
NEW EQUIPMENT. PROJECT FOCUSED.SERVING TEXAS
Electrical switchgear cabinets arranged for a project

NEW SWITCHGEAR FOR YOUR PROJECT

MANUFACTURING / EQUIPMENT / TEXAS

Define the Metering Scope Before Equipment Design

Start by stating what the metering system must do: measure a service entrance, feeder, generator connection, or other defined circuit; provide local indication; communicate readings to a building or energy-management system; or support more than one of those purposes. Identify each measurement location on a one-line diagram and distinguish revenue metering from operational monitoring. Those uses can carry different accuracy, acceptance, and ownership requirements, so they should not be treated as interchangeable.

For each location, provide the nominal system voltage, phase and wire arrangement, frequency, grounding approach, and expected current range. Note whether the meter is part of a new switchboard assembly or a new component being integrated into existing equipment. Identify enclosure and environmental constraints, available mounting space, and the project’s applicable drawings or specifications. These inputs let us review physical fit and electrical interfaces without assuming that a meter can be added to every existing assembly.

Select Power Meters Around Required Measurements

Specify the measurements that matter to the application rather than naming a meter alone. Common requested points include phase and line voltages, phase currents, real and reactive power, apparent power, power factor, frequency, and accumulated energy. If the system needs demand values, interval records, alarms, or power-quality indicators, identify the exact functions and reporting intervals. Meter capabilities and configuration vary; each requested point should be checked against the proposed device and project requirements.

Tell us whether readings must appear at a local display, pass to a remote system, or both, and whether the meter requires auxiliary power. Provide the requested accuracy class or performance requirement when the project documents define one, along with any required password, configuration, or commissioning records. A single-line diagram, meter schedule, and point list are useful review documents. Final meter selection remains subject to configuration review and confirmation for the quotation.

Coordinate CT Selection, Placement, and Wiring

Current transformers must suit the conductor arrangement and the measurement range at the specified location. Provide the expected maximum load, conductor or bus dimensions, number of conductors per phase, and available space around the primary path. State whether the design calls for window, bar, or another CT form, and identify the required secondary output and performance criteria if established by the engineer or utility. Do not choose a ratio solely from a nameplate load without considering the intended operating range and measurement purpose.

Show CT locations and polarity orientation on project drawings, and clarify whether CT secondary wiring is factory-installed in new equipment or completed by others in a retrofit. Identify terminal points, wire routing constraints, shorting provisions, and who supplies and lands the conductors. CT wiring and connection work must be performed by qualified personnel under approved procedures. Existing equipment condition, dimensions, and access should be documented before any retrofit component is quoted.

Specify Protocols and the Communications Path

Name the required communications protocol and interface at the meter, such as the protocol specified by the project’s controls architecture, and provide the relevant network or serial requirements. Include addressing method, baud rate or network settings where applicable, connector or terminal expectations, and whether the project uses a gateway. Confirm which device is the communications master and whether meters share a bus or connect individually. These details prevent an assumption that a supported protocol automatically means a complete, interoperable network.

Define the path from each meter to the monitoring platform: direct connection, gateway, network switch, or another approved arrangement. State who provides network infrastructure, configuration, cybersecurity review, and software integration. If the customer requires a specific meter model or protocol, provide that requirement with the project documents and request confirmation of availability and fit. Protocol support, register mapping, and communications accessories must be reviewed for the proposed configuration rather than presumed from a general product description.

Build a Point List That Supports Integration

A usable point list identifies each signal by meter and circuit, names the value, gives units and expected scaling, and states whether the point is read-only, alarm-based, or used for trending. Include update or polling expectations and any required status or diagnostic points. If points will be mapped into a customer platform, provide its naming convention, data format, and any required register or object list. This allows the controls integrator to check the intended data exchange before equipment details are finalized.

Separate essential points from optional ones and identify any calculations expected in the meter versus the supervisory system. For example, a demand value may depend on a defined interval, while energy totals may need reset or rollover handling. Clarify alarm thresholds and who approves them. Where a required point cannot be supported directly, it is better to resolve the gap during submittal review than to rely on an undocumented workaround after the switchgear arrives.

Set Utility, Customer, and Manufacturer Boundaries

Identify which party owns, specifies, supplies, and accepts each metering element: utility revenue meter and instrument transformers, customer-owned monitoring meter, CTs, wiring, communications equipment, and data platform. Utility requirements may govern meter socket or compartment arrangements, instrument transformer characteristics, sealing, access, and acceptance. Provide the serving utility’s written criteria and the project contact responsible for resolving questions. Utility approval and revenue-metering acceptance remain separate from the manufacturer’s equipment configuration review.

For customer monitoring, define who supplies the meter, configures it, connects it to the network, maps points, and verifies data at the receiving system. For new retrofit components, state who confirms existing-equipment dimensions, evaluates compatibility, and performs field installation. We manufacture and supply new equipment. Installation, servicing, testing, and energization are the responsibility of qualified personnel following approved procedures.

Prepare a Reviewable Quote and Submittal Package

A pricing request is most useful when it includes the one-line diagram, switchboard schedule, metering locations, CT requirements, meter functions, communications protocol, point list, and utility criteria available at the time. Add enclosure constraints, required drawings, submittal milestones, requested component origin, and the project schedule. Flag unresolved decisions instead of leaving them implicit. We can review the defined scope for new equipment or new retrofit components and identify which details need clarification before a configuration is finalized.

Confirm the required deliverables, such as equipment drawings, wiring diagrams, meter documentation, communications references, and test documentation, in the project specification. Availability, engineering, lead time, component origin, and documentation are confirmed for each quotation; no single configuration or schedule should be assumed from the page topic. For switchboard assemblies, verify the applicable standards and listing for the actual configuration. UL 891 applies to switchboards, not universally to every switchgear assembly or metering component.

LET'S BUILD SOMETHING

Start with
the details.

Tell us what you’re working on. The more you can share about your project, the better we can begin the conversation.

PROJECT INQUIRY

Request a quote

This form opens your default email application. Your inquiry is sent only when you send the email. You can also email us directly or call our team.

* Required fields

Request a quote