347/600 V Selection

Selecting 347/600-Volt Distribution Equipment

Selecting 347/600-volt distribution equipment begins with the electrical system and the work the equipment must perform—not with a product name alone. This voltage is commonly used in three-phase, four-wire wye systems, but the actual service configuration, loads, available fault current, and utility requirements must be confirmed for each project. Switchgear Builders Texas manufactures new equipment and new retrofit components to specification, serving Texas from the United States and shipping nationwide. We review project requirements for each quotation; availability, engineering, lead time, component origin, and documentation are subject to confirmation.

UL 891 switchboardsMADE IN USAFAST lead times
NEW EQUIPMENT. PROJECT FOCUSED.SERVING TEXAS
Electrical switchgear cabinet and control equipment

NEW SWITCHGEAR FOR YOUR PROJECT

MANUFACTURING / EQUIPMENT / TEXAS

Choose the assembly around the distribution function

For a 347/600 V system, first map where service conductors enter, where protection and isolation are needed, and how power branches to downstream loads. A switchboard can suit a centralized distribution point with feeder sections and overcurrent devices. Switchgear may be appropriate where the specified protective-device class, construction, or operating arrangement calls for that assembly type. A panelboard generally serves branch circuits or smaller downstream distribution. These are functional distinctions, not interchangeable labels.

Document whether the equipment is service entrance or downstream, the number and purpose of mains and feeders, the connected loads, and any planned future circuits. For a three-phase, four-wire wye system, confirm the required phase and neutral arrangement and identify 347 V line-to-neutral loads separately from 600 V line-to-line loads. Also establish whether metering, transfer provisions, or other project features are required. These details shape the assembly and should be resolved before requesting pricing.

Match protective-device class to the application

Compare protective devices by their intended function, interrupting capability, operating method, coordination needs, and maintenance approach. Molded-case circuit breakers and other breaker types have distinct application limits; a fused arrangement may be considered where the design calls for it. Switchboard, switchgear, and panelboard construction can constrain which device families are suitable. Specify the required device class and trip or fuse characteristics from the project design rather than assuming a familiar device can be substituted.

For each main and feeder, provide the load served, conductor information where available, required continuous or adjustable settings, and the basis for protection coordination. Identify any selective-coordination, ground-fault protection, or arc-energy-reduction requirements shown in the design documents. The engineer of record must establish protection criteria and approve the final coordination. We can review the requested configuration for quotation, but device selection, settings, and compatibility must be confirmed against the complete system and applicable project requirements.

Confirm short-circuit ratings against the system study

Equipment withstand and interrupting ratings must be appropriate for the available fault current at the installation point. Request the latest utility fault-current information and the project short-circuit study, including the assumptions used for transformer size and impedance, conductor length, and upstream protection. Confirm whether the specified rating applies to the complete assembly, individual protective devices, or a documented series combination; those values are not automatically equivalent.

Include the required short-circuit rating and its basis in the equipment schedule, then have the design team verify that the proposed configuration is suitable for the calculated duty. Do not infer a rating from voltage, enclosure size, or product category. Where the utility source or project scope may change, identify that uncertainty before equipment is finalized. Rating availability and supporting documentation are configuration-specific and must be reviewed with the quotation.

Plan working space and equipment access

Reserve the installation area using the applicable electrical-code requirements, project drawings, and equipment instructions. Check working-space depth and width, ceiling height, door swing, egress, and access to operating handles and service points. Account for the particular voltage-to-ground conditions and what other equipment or surfaces are opposite the assembly; a generic clearance assumption may not fit the actual room. The electrical designer and authority having jurisdiction should confirm the required dimensions.

For 347/600 V equipment, also coordinate cable entry, bending space, bus or feeder routing, ventilation, and handling access before fixing the room layout. Identify whether conductors enter from the top, bottom, or another planned route, and show obstructions such as piping, structural members, or adjacent gear. Review shipping sections and the path from unloading point to final location. These checks can expose layout conflicts early, before they become field changes.

Compare maintainability over the equipment life

Maintainability depends on more than the assembly designation. Compare how protective devices are accessed and replaced, whether isolation points are provided as specified, how compartments or covers are arranged, and whether routine inspection can be performed within the room’s available space. Ask which components are expected to be maintained or changed during the equipment life, who will perform that work, and what approved procedures the facility requires.

A retrofit scope should identify the existing equipment manufacturer and model where known, nameplate data, available drawings, bus and connection details, device type, and the precise components to be replaced. We supply new retrofit components only; fit and suitability require review of the existing assembly and project documentation. Do not assume a component is compatible based on appearance or nominal voltage. Installation, inspection, testing, and energization require qualified personnel following approved procedures.

Verify utility, standards, and procurement details

Confirm that the serving utility supports the proposed service voltage, phase configuration, metering arrangement, and service-entrance requirements at the project location. Utility availability and requirements are location- and project-specific; the voltage designation alone does not establish that a connection can be provided. Coordinate service characteristics and utility review with the engineer and local utility before releasing equipment details. Include any utility-furnished specifications or approval requirements in the quotation package.

For procurement, submit the one-line diagram, equipment schedule, fault-current basis, protective-device requirements, room layout, connection preferences, and any required submittal or test documentation. Specify new equipment and new retrofit components. State the requested component origin; American components can be specified, but domestic-content or Buy American compliance must be separately defined and confirmed rather than assumed. UL 891 applies to switchboards, not every switchgear or panelboard configuration; verify applicable standards and listing requirements for the exact assembly.

LET'S BUILD SOMETHING

Start with
the details.

Tell us what you’re working on. The more you can share about your project, the better we can begin the conversation.

PROJECT INQUIRY

Request a quote

This form opens your default email application. Your inquiry is sent only when you send the email. You can also email us directly or call our team.

* Required fields

Request a quote